Lihlahisoa

  • Self Drilling Screws

    Self cheka woman stage

    Lisebelisoa tsa ho cheka tse entsoeng ka tšepe e thata ea k'habone kapa tšepe e sa hloekang li sebelisetsoa ho tiisa. Classified ke sekontiri se metsi sa khoele, ho na le mefuta e 'meli e tloaelehileng ea likhoele ho intša ho cheka: khoele e metle le khoele mahoashe.
  • Wood Screws

    Lisebelisoa tsa Wood

    Sesepa sa lehong ke nsete e entsoeng ka 'mele, e shank le' mele o likhoele. Kaha screw eohle ha e so ts'oaroe, ho tloaelehile ho bitsa lisepa tsena tse seng kae (PT). Hlooho. Hlooho ea screw ke karolo e nang le drive mme e nkuoa e le sehlohlolong sa screw. Boholo ba lisepa tsa lehong ke lihlooho tse Flat.
  • Chipboard Screws

    Lisebelisoa tsa Chipboard

    Lisebelisoa tsa chipboard ke li-screws tse ithekisang ka bophara ba screw e nyane. E ka sebelisoa bakeng sa lits'ebetso tse nepahetseng joalo ka ho tiisa li-chipboards tsa letsoalo le fapaneng. Li na le likhoele tse mahoashe ho etsa bonnete ba hore ho luloa hantle ho sekareleta holim'a chipboard. Boholo ba lisepa tsa chipboard li ithekela, ho bolelang hore ha ho hlokahale hore lesoba la sefofane le chekoe pele. E fumaneha ka tšepe e sa hloekang, tšepe ea khabone le tšepe ea alloy hore e khone ho tsofala le ho feta ha e ntse e e etsa hore e se ke ea bola.
  • Drywall Screws

    Lisebelisoa tsa Drywall

    Lisebelisoa tsa Drywall tse entsoeng ka tšepe e thata ea k'habone kapa tšepe e sa hloekang li sebelisetsoa ho tiisa mabota a ommeng ho li-studs tsa patsi kapa tsa tšepe. Li na le likhoele tse tebileng ho feta mefuta e meng ea lisete, tse ka li thibelang ho tlosa habonolo leboteng le ommeng.
  • Wedge Anchors

    Liankora tsa Wedge

    Ankora ea chesele ke mofuta oa mochini o holisang o nang le likarolo tse 'ne:' mele oa ankora o tiisitsoeng, sekhechana sa katoloso, nate le washer. Liankora tsena li fana ka boleng bo phahameng ka ho fetesisa le bo tsitsitseng ba ho ts'oara ankora ea mofuta ofe kapa ofe
  • Drop-In Anchors

    Liankora tse oelang

    Liankora tse oeleng ke tse tšehali tsa konkreite tse etselitsoeng ho emisa konkreite, hangata li sebelisoa bakeng sa lits'ebetso tse holimo hobane polaka ea ankora ea kahare e hola ka litsela tse 'ne ho ts'oara ankora ka tieo kahare ho lesoba pele o kenya molamu kapa bolt. E na le likarolo tse peli: plug ea expander le 'mele oa ankora.
  • Spring Washers

    Lisebelisoa tsa selemo

    Lesale le ile la aroha ka nako e le ngoe 'me la kobeha sebopeho sa helical. Sena se etsa hore washer e sebelise matla a selemo pakeng tsa hlooho ea fastener le substrate, e bolokang washer e le thata khahlanong le substrate le khoele ea bolt e thata khahlanong le nate kapa substrate khoele, e baka ho ferekana le ho hana ho potoloha. Litekanyetso tse sebetsang ke ASME B18.21.1, DIN 127 B, le United States Sesole sa NASM 35338 (eo pele e neng e le MS 35338 le AN-935).
  • Flat Washers

    Lisebelisoa tsa Flat

    Li-washer tse bataletseng li sebelisetsoa ho eketsa bokaholimo ba nate kapa hlooho ea fastener ka hona ho hasanya matla a tlamang sebakeng se seholo. Li ka ba molemo ha u sebetsa ka lisebelisoa tse bonolo le masoba a maholohali kapa a sa tloaelehang.
  • Full Threaded Rods

    Li-Rod tse Felletseng

    Lithupa tse felletseng li tloaelehile, li-fasteners tse fumanehang habonolo tse sebelisoang lits'ebetsong tse ngata tsa kaho. Lithupa li ntse li hokeloa khafetsa ho tloha pheletsong e 'ngoe ho isa ho e' ngoe 'me hangata li bitsoa melamu e felletsoeng ka botlalo, redi rod, molamu oa TFL (Thread Full Length), ATR (All rod rod) le mabitso a mang a fapaneng le lipolelo.
  • Double End Stud Bolts

    Habeli End Stud Bolts

    Li-bolts tse peli tse qetellang li koaletsoe ka likhoele ntlheng ka bobeli ka karolo e sa sebetsoang lipakeng tsa lipheletsong tse peli. Likarolo tsena ka bobeli li na le lintlha tse senyehileng, empa lintlha tse chitja li ka fanoa ka mahlakore ka bobeli kapa ka bobeli molemong oa moetsi, li-stud tse peli tse qetellang li etselitsoe hore li sebelisoe moo karolo e 'ngoe ea likhoele e kentsoeng ka sekoting se tlantsoeng le nate ea hex e sebelisitsoeng ho e' ngoe. qetellong ho ts'oara sets'oants'o holim 'a stud eo e kenngoeng ho eona
  • Flange Nuts

    Linate tsa Flange

    linate tsa flange ke e 'ngoe ea linate tse fumanehang ka ho fetisisa' me li sebelisoa ka liankora, li-bolts, li-screws, li-studs, li-thread le likhoele tse ling tse nang le likhoele tsa mochini. Flange ke ho bolelang hore ba na le flange tlase.
  • Lock Nuts

    Notlela

    Metric Lock Nuts kaofela li na le tšobotsi e hlahisang ketso e sa feleng ea "ho notlela". Ho hloloa ha Torque Lock Nuts ho its'etleha ka phetoho ea khoele mme e tlameha ho ts'oaroa le ho tima; ha li na lik'hemik'hale le mocheso o lekantsoeng joalo ka Nylon Insert Lock Nuts empa ts'ebeliso e ncha e ntse e lekantsoe.
12 E latelang> >> Leqephe la 1/2